Frame Building with Bilenky.

Stephen Bilenky the man behind the award-winning frames of Bilenky Cycle Works recently returned to Metal Guru to teach a Fillet Brazed Frame Building Class to two eager students. With 30 years of professional frame building experience, Stephen is extremely knowledgeable on the subject. He also has an excellent wit and sense of humor and his lectures were informative and technical but still engaging.

Scott Schofield of Indigo Custom Bicycles who builds custom lugged frames enrolled in the class so he could refine his techniques in fillet brazed construction to better serve customers that might require a specific geometry and tubing diameters that lugged construction methods might not be able to produce. Scott chose to build a sloping top tube cyclo-cross frame with a roomy 32+ tire clearance, an oversize tube set, rim brakes and S-bend rear stays.

Chris H. built a custom sized road frame for his wife with a geometry suited to long distance riding. Due to her smaller stature Chris decided to use 26″ diameter rims rather than either 650c or 700c. Chris decided to go with a tube set with traditional tubing diameters to keep the ride feel compliant and chose to use straight rear stays for the simple clean aesthetic.

The following gallery shows their progress through the class.

A student list already forming for another class, please email metalguru@viciouscycles.com or call (845)883-4303 ext. 2 if you are interested. A description of the class details can be found here.

Thanks for everything Stephen. Great work Chris and Scott!

~Carl

click on any photo for caption and to begin slide show.

Fillet Brazing with Bilenky

Metal Guru is proud to annlighting torchounce the return of guest instructor Stephen Bilenky of Bilenky Cycle Works, who will be teaching a course in fillet brazed steel bicycle frame building. The class will be limited to two students and Carl Schlemowitz will be co-instructor, so there will be a one to one ratio between student and teacher. The class will be 68 hours over 8 1/2 days. The two spring 2015 class dates scheduled are March 30 through April 8  and June dates TBA with no class on Sunday. The course cost is $3750. Interested students should please send an email to metalguru@viciouscycles.com or call Carl at (845)883-4303 ext. 2. Students will finish course with a completed frame, ready for paint.

The photographs in the gallery below are fillet brazed joints done by students during the 2013 class taught by Stephen Bilenky at Metal Guru. A complete account of the 2013 class can be found here and here.

Brass Fed (Part 2).

This post further documents Rob S. and Dan W. as they progressed through their recent Fillet Brazed Frame Building Course with Stephen Bilenky at Metal Guru. Both students chose to build touring frames that will fit a 26″ x 2.3″ tire. The gallery below shows the steps they took from tacking through to the finished frame. To see their initial efforts check here.

A student list already forming for another class, please email metalguru@viciouscycles.com or call (845)883-4303 ext. 2 if you are interested. A description of the class details can be found here.

Nice work!

~Carl

Brass Fed (Part 1).

CoolHBStephen Bilenky the man behind the award-winning frames of Bilenky Cycle Works was recently in-house at Metal Guru teaching a Fillet Brazed Frame Building Class to two eager students. With 30 years of professional frame building experience, Stephen is extremely knowledgeable on the subject. He also has an excellent wit and sense of humor and his lectures were informative and technical but still engaging, and are peppered with good natured wordplay.

In our class discussions we explored how fillet brazing is a wholesome method of frame construction in regards to having unrestricted geometry, being strong and also visually pleasing. It wasn’t long before we began joking and comparing the fillet brazed frame construction method to wholesome food production methods. We then coined the phrase “brass fed” playfully implying that these bikes were pasture raised on brass wires. This of course conjures an immediate mental picture which lead to the illustration below. I do however feel it necessary to disclose at this time that Stephen Bilenky is a vegetarian.

brass fedDan W. and Rob S. both decided to build touring frames that could fit up to a full size 26” off road tire and full rack, fender and three H2O bottle boss mounts. Rob asked Stephen to install couplers so he could easily travel with the frame. While Dan opted to include provisions for a SRAM Hammerschmidt internally geared crank and a NuVinci variable speed internally geared rear hub. Both frames have geometry designed around a non-suspension compensated length rigid front fork. The following gallery shows their progress through the machining and tube preparation portions of the class.

A student list already forming for another class, please email metalguru@viciouscycles.com or call (845)883-4303 ext. 2 if you are interested. A description of the class details can be found here.

For those who don’t know, Stephen Bilenky is the first guest instructor at Metal Guru to teach a frame course utilizing the fillet brazed construction method. Thanks for everything Stephen.

~Carl